Marcos Gil, REALTOR® · Keller Williams Commonwealth

Brokered by

Kentucky Well Tags and Casing: What a Buyer Can Verify

A small modern house with dark vertical siding and a sloped metal roof on a wooded hillside

Written by

in

Buyer diligence · Rural water

Kentucky water well construction standards are written down, and they produce two things a buyer can physically check: a numbered tag on the well and a construction record the driller had to file. If a Lee, Estill, Powell or Wolfe County house runs on a private well, those two items tell you more in ten minutes than an afternoon of guessing at the wellhead.

Is there supposed to be a tag on the well?

Yes. Each well constructed or modified must be tagged with a well identification number tag provided by the cabinet, and that number carries forward to later work.

Section 1(8) of 401 KAR 6:310 requires the tag, and requires an existing well identification number to be written on the maintenance and plugging record for any well being modified or abandoned. If no number exists at the time of modification or abandonment, the well is tagged then and the newly assigned number is recorded. So on a house you are considering, the tag is the hinge: with a number you can ask for records by that number; without one, you are starting the well’s documented history at your own closing.

Who is allowed to drill or alter the well?

Only a certified water supply well driller, or a certified assistant working under the direct supervision of one, may construct, modify or abandon a water supply well.

Section 1(1) of 401 KAR 6:310 points to KRS 223.425 and 401 KAR 6:320 for that certification, and Section 1(3) requires the certified driller to give the assistant written specifications covering construction, alteration, maintenance, repair, reworking, development, abandonment or plugging, recorded on the Uniform Kentucky Well Construction Record. Changes made during the work have to be approved in advance by a certified driller and recorded on an amended record. The point for a buyer: “my cousin deepened it a few years ago” is not a neutral statement. Work on a well is regulated work with a paper trail attached.

The driller owes the owner a copy of the record, the bacteriological results and the Water Well Owner’s Guide within sixty days. Most sellers have never been asked for that envelope.

What paperwork should already exist?

Within sixty days of completion, modification or abandonment, the driller files the record with the cabinet and gives the owner a copy, the bacteriological sample results and an owner’s guide.

Sections 1(6) and 1(7) of 401 KAR 6:310 set both sixty-day duties. The filed report must include all information about the depth and the materials used, plus the bacteriological sampling results required by Section 9(6). The owner’s copy adds the Water Well Owner’s Guide and any additional water quality analysis that was run. On a resale, ask for that packet by name. If the seller has it, you have the well’s depth, its materials and a baseline bacteriological result without paying for anything. The companion piece is the well record itself under KRS 223.440, and the broader checklist lives on the septic and well guide.

Are there minimum construction specifications?

Yes. Materials must be approved for water well use, and steel or PVC casing and liners must have a minimum inside diameter of four inches, with limited exceptions.

Section 2 of 401 KAR 6:310 requires materials approved for water well use by the National Sanitation Foundation, ASTM or the American Petroleum Institute, sets the four-inch minimum inside diameter for steel and PVC casing other than driven point and jetted wells, and prohibits installing used, damaged or contaminated casing or liner pipe. The regulation also carries dimension tables for steel and PVC casing by size. One useful detail sits in the variance provision: a driller asking for a variance must describe the distance from the proposed well to septic systems, sewers, and petroleum and chemical storage tanks on the site and on adjacent properties. That is the state naming, in its own words, the three neighbours a well should not have close by.

The pattern I see on rural listings in this part of Kentucky is not bad wells. It is undocumented wells. A house changes hands two or three times, each buyer accepts “the water’s always been fine,” and the construction record never travels with the property. It costs nothing to break that chain: find the tag, write down the number, and ask for the sixty-day packet during your inspection period. If the packet is gone, you at least know to budget for your own water test rather than assume one happened. See also the county pages for homes for sale in Beattyville and homes for sale in Irvine.

Frequently asked questions

How long does the driller have to file the well record in Kentucky?

Sixty days. Within sixty days after the well is completed, modified or abandoned, the certified driller submits the Uniform Kentucky Well Construction Record, or the maintenance and plugging record, to the cabinet under Section 1(6) of 401 KAR 6:310.

What is the minimum casing size for a Kentucky water well?

Steel or PVC well casing and liners must have a minimum inside diameter of four inches, except for driven point wells and jetted wells addressed separately in Section 8(3) of the regulation.

Is a bacteriological test part of the required record?

Yes. The report filed with the cabinet must include the results of the bacteriological sampling required by Section 9(6), and the owner is entitled to a copy of those results within sixty days.

Last updated November 22, 2026.

By Marcos Gil, REALTOR® — Keller Williams Commonwealth · KY Real Estate License No. 296259 · Call or text (859) 310-1209. General information about Kentucky regulations, not legal advice. I am your agent, not your lender. Marcos Gil also owns Central Property Services and publishes investinthegorge.com and forsalelexingtonky.com.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *